How to program a K-Steel 1156/10 or a Sinthesi 1105/2 keypad

This article will show you how to program or change the door open code on an Urmet K-Steel 1156/10 keypad and an Urmet Sinthesi 1105/2 keypad.

Table of Contents:

Program keypad:

Press the button on the rear of the keypad three times within a time period of six seconds
Enter a password (must be six digits) and press the ‘Key’ button
Enter the door release time, for example for five seconds press 5 and then press the ‘Key’ button
Enter the first door open code (between three and eight digits) and press the ‘Key’ button
Up to eight different door open codes can be entered. After you have finished entering door open codes press and hold the ‘X’ button until a long bleep is heard. This will exit from the programming mode

Changing Door Open Codes:

Press the ‘Key’ button followed by the ‘X’ button followed by the ‘Key’ button; now enter the six-digit password
Press the ‘Key’ button twice. • Press 5 (for 5 seconds door release time) and press the ‘Key’ button
Enter the new door open code (between three and eight digits) and press the ‘Key’ button
Up to eight different door open codes and be entered. After you have finished entering door open codes press and hold the ‘X’ button until a long bleep is heard. This will exit from the programming mode