IPerVoice
      Back to home
      1. Home
      2. Legacy Systems
      3. IPerVoice

      How to use the 1707/1 IPerVoice Imago Monitor message service

      This article tells you how to use the 1707/1 IPerVoice Imago Monitor message service.

       

      The Imago monitor has six buttons on the front - these are as follows:

      1. ‘Speak’ button
      2. ‘Key’ button
      3. Button with one dot Button 1
      4. Button with two dots Button 2
      5. Button with three dots Button 3
      6. Button with four dots Button 4 

       

      To turn on the answer service (i.e., turn the monitor off so it won’t ring) press Button 4. The Key Button will be lit red – not flashing.

      • If a visitor calls you while the monitor is in this state they will get a message at the entry panel to tell them to leave a message.
      • When you want to turn the monitor back on (so that you can receive calls) press Button 4 again.
      • If someone has left a message the Key Button will flash (red).

      To view messages:

      • Press the speak button
      • Press button 3 – you will now see the number of messages that have been left. Press button 3 again to begin viewing recorded messages. 
      • To delete a message press and hold button 3 for 3 seconds. (You cannot delete a message without first viewing it).
      • To come out of the message service, press the speak button. 

       

      To conclude:

      • If the monitor has a steady red key then it is turned off and won’t ring.
      • If it has a flashing red key then there is one or more recorded messages.