IPerVoice
      Back to home
      1. Home
      2. Legacy Systems
      3. IPerVoice

      How to connect and fault find a 1039/50 IPerVoice Gateway

      This article outlines how to connect to and fault find for a 1039/50 IPerVoice Gateway


      Connections

      • POE device this needs to be connected to a full power POE network port, this needs to be connected to the LAN input port.
      • The BUS Out port needs to be connected to a 1039/20 Riser Power Supply Unit
      • Power On LED needs to be on this shows the 1039/50 has SIP registration to an IPerVoice Server.
      • Video test button - this is used to set the video level within the riser using the video adjustment on the 1039/20’s, this must be turned off for normal use.

      NOTE: The purpose of this device is to convert the SIP protocol on the LAN to a Riser Protocol for use in the analogue riser.

      Basic Fault Finding:

      • Is the Power Light on if not check the cable between the 1039/50 and the POE Port
      • No Video in Riser Check the video test button on the front of the device
      1039/50 Datasheet