Easy Door Controller
      Back to home
      1. Home
      2. Easy Door
      3. Easy Door Controller

      How to Wire a Door Locking Device into an Easy Door Controller

      This article shows you how to connect a door locking device into an Easy Door controller.

       

      The lock output from the Easy Door controller is by means of a volt free relay with Common (C) Normally Closed (NC) and Normally Open (NO) connections.

       

      Connecting a Fail Safe Device

      Watch the video below to learn how to wire a Fail safe/unlocked electronic lock into the Common (C) and Normally Closed (NC) contacts.

       

      Connecting a Fail Secure Device

      Watch the video below to learn how to wire a Fail secure/locked electronic lock into the Common (C) and Normally Open (NO) contacts.

       

      A suppression device must be fitted as close to the lock as possible, across the lock connections, to eliminate back EMF. 

       

      If a suppression device is not fitted the controller may be irreparably damaged.