How to program 2Voice entry panels using the 2Voice Android app

This article shows you how to program your 2Voice entry panels using the 2Voice Android app.

Now follow the step-by-step breakdown below:

Step 1:

Open the 2Voice Android app and select Configuration, then New Configuration, choosing the type of panel you will be setting up (the product codes can be found on the back of the panels).

Step 2:

Complete the configuration parameters / settings - You can refer to our article What do the 2Voice Android app settings mean? if you need to.

Step 3:

Once the configuration parameters / settings have been completed, Save the file (e.g., Apartment 1). Tap OK to confirm the file name and save this.

Step 4:

Now go back and hit Load from File. Then, select the required file and hit Send to send the  configuration to the panel. 

Step 5:

Select the device and then enter the Bluetooth PIN number to connect, it will appear in the list as Bluetooth module. Enter the default password - 1000. After a moment the configuration should have been successfully sent!