Tokens
      Back to home
      1. Home
      2. Easy Door
      3. Tokens

      How to Program Easy Door Master Tokens in Standalone Mode

      This article shows you how to program Easy Door Master Tokens in standalone mode.

      A ‘Master token’ is used to enter a programming state that enables additional user tokens to be added to a controller and granted access to a door.

       

      Use the video walk-through below to learn how to program a Master Token:

       

      We've broken down the steps for you below so you can refer back to these at any time:

      Step 1 With the Easy Door controller powered up and connected to a power supply, move the DIP switch on the controller to position 1 (PROG).
      Step 2 Present a token to the reader (not the controller). Each time you present a token, the reader LED will briefly change state from solid to flashing.
      Step 3 Finally, when you have finished adding your master tokens, exit the programming mode by moving the DIP switch back to the ON (EXPL) position.

       

      You can have up to 3 ‘Master tokens’ programmed onto a single controller - if these are lost or damaged you will need to delete the old fobs and create new ones.