IPassan Hardware
      Back to home
      1. Home
      2. IPassan
      3. IPassan Hardware

      How to put the IPassan 4 Door Base controller in Maintenance Mode

      This article shows you how to set the jumper in both the ON and OFF positions.

       

      You should be using the Maintenance mode (sometimes referred to as commissioning mode) to test a door set up with a reader and lock, without having to program any tokens.

       

      Watch the video below to move the maintenance jumper to the maintenance position:

      Please note, in Maintenance Mode, any 13.56Mhz FDI key will work on the readers without being programmed.