How to upload a configuration to an existing IPerCom site

This article will show you how to send a configuration to an existing site using the IPerCom Installer Tool.

Follow the 3 simple steps below if you have created a site offline and now need to upload this to a site which is already installed.

Step 1:

First, select the version of the IPerCom site you wish to upload to and click OK. Now click Open and choose the configuration you wish to upload, clicking OK after this.

Step 2:

Then you should click Connect at the bottom of the screen, entering the Urmet password once the server has been detected. Now click Configuration and Apply changes on the next screen. This begin the upload process.

Step 3:

Finally, you'll notice the Configuration status go from red to green and is now ALIGNED. Now all you need to do is click Date/time at the top and then hit Set date and time, clicking Yes when the small window pops up and OK after that.

The default Urmet password you will be asked to enter is 1937.