How to use the Castel IP search tool

Castel IP Search is a software application for detecting Castel products connected to the local area network regardless of their network configuration.

You can modify the network settings of the products directly from Castel IP Search.

Run the .EXE file (link attached at the bottom of this article) and you should see something similar to this -

This tool will allow you to modify the IP address of any device.

It is possible to click through to access the intercom station web interface to configure the product, modify the IP address etc.

Please note: the Network Interface Card of the PC where the IP Search tool is installed, needs to be in the same IP Range as the device you are attempting to connect to.

Only one session can run at a time. If you open another session no devices will be found.

Please use our FTP Site for firmware and documentation

ftp://ftp.urmet.co.uk:2121

Username = UDPC05\FTP1

Password = #V2RK$Z@q\

Use Internet Explorer as many browsers are blocking access to FTP sites.

Navigate to the Castel folder for the latest documents and firmware.